Action	Key Code	Options	Notes
Action	Key Code	Options	Notes
Enter Interactive Voice Response Menu.	****		Use this command (four stars) to enter the Interactive Voice Response Menu. Do not press any other keys until you hear, “Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit.�
Check net connection type	100#		Hear the Internet connection type of the Phone Adapte
Check internet IP address	110#		Hear the IP address assigned to the Phone Adapter’s Internet (external) interface.
Check Network Mask or Subnet Mask	120#		Hear the network or subnet mask assigned to the Phone Adapter.
Check Gateway IP address	130#		Hear the IP address of the Phone Adapter (usually the network router).
Check MAC Address	140#		Hear the MAC address of the Phone Adapter in hexadecimal string format.
Check Firmware Version	150#		Hear the current version number of firmware running on the adapter.
Check Primary DNS server IP address	160#		Hear the IP address of the primary DNS server
Check web server port	170#		Hear the port number of the internet web server used for the web based utility
Check local IP address	210#		Hear the local IP address of the phone adapter.
Set internet connection type	101#	Press 0 to use DHCP. Press 1 to use a static IP address. Press 2 to use PPPoE	Select the type of Internet connection you are using. Refer to the documentation supplied by your Internet Service Provider (ISP).
set static IP address	111#	Enter the IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point.	First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,� if you try to set the static IP address.
Set Network (or Subnet) Mask	121#	Enter the network or subnet mask using numbers on the telephone keypad. Use the * (star) key when entering a decimal point.	First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,� if you try to set the network or subnet mask
Set Gateway IP Addres	161#	Enter the IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point.	First, set the Internet Connection Type to static IP address; otherwise, you will hear, “Invalid Option,� if you try to set the IP address of the primary DNS server.
Set the Mode	201#	Press 0 to select the router/NAT mode. Press 1 to select the bridge/switch mode.	If the Phone Adapter acts as the router for your network, use the router/NAT mode. If your network already has a router, use the bridge/switch mode.
Enable/Disable WAN Access to the Web-based Utility	7932#	Press 1 to enable. Press 0 to disable	Use this setting to enable or disable WAN access to the Web-based Utility. (This Utility lets you configure the Phone Adapter.
Manual Reboot	732668		After you hear, “Option successful,� hang up the phone. The Phone Adapter will automatically reboot
Factory Reset	73738	Press 1 to confirm. Press * (star) to cancel.	If necessary, enter the password. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, “Option successful.� Hang up the phone. The Phone Adapter will reboot, and all settings will be reset to their factory default settings
User Factory Reset	877778	Press 1 to confirm. Press * (star) to cancel.	The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, “Option successful.� Hang up the phone. The Phone Adapter will reboot and all user-configurable settings will be reset to their factory default settings